40W CO2 Laser Engraving Machine Power Supply
-
Payment
-
Origin
China Mainland
-
Minimum Order
1
-
Packing
Pieces
- Contact Now Start Order
- Description
Product Detail
Basic Info.
Package:Standard Export Box | Trademark:Taishun |
Origin:Shenzhen, China | Input Voltage:AC220V or AC110V |
AC Frequency:47- 440Hz | Cold Surge Current:<=60A(AC220V Input) ≤ 30A(AC110 Input) |
Current Leakage:<=0.7mA(AC220V Input)≤ 0.4mA(AC110V Input) | Output Maximum Input Voltage:DC 25kv |
Maximum Output Current:DC 20mA | Efficiency:90% (Full Load) |
Mean Time Between Failure (Mtbf):>10000h | Response Speed:<=1ms |
Dimension:L*W*H=167*144*97(mm) |
Product Description
Main Feaures
1) Good compatibility: It can be applicable to 70w 60w 50w and 40W laser tube.
2) Fast response speed and effect.
3) Dramatically lengthen the life of laser.
4) Easy Control: The start and stop of laser can be easily controlled by TTL level. And there are protection switch to test the external water, ventilation, etc.
5) Easy control of laser power: Both 0~5V analog signal and PWM signal can control the laser power.
6) The power supply has open circuit protection: Under the condition of good protective earthing, the power supply can work in open-circuit for a short time, which could avoid the damage of laser power supply because of the bursting of laser tube, thereby enhancing the life of power supply.
7) The power supply can take feedback interface which can be used in closed-loop control and testing the working current of laser.
8) The power supply adds a new function, that is timely scene judging which part is damaged, laser tube or laser power.
9) Application: acrylic sculpture, cut; fabric sculpture, cut; rubber sheet sculpture, cut, etc.
Specification
Input Voltage | Input Voltage | AC220V or AC110V | |
AC Frequency | 47-440Hz | ||
Cold surge current | ≤60A(AC220V input) | ≤30A(AC110V input) | |
Leak current | ≤0.7mA(AC220 input) | ≤0.4mA(AC220V input | |
Output | Max output Voltage | DC 35KV | |
Max Output current | DC 24mA | ||
Efficiency | when≤92%load down | ||
Time no-failure | ≤10000hours | ||
Response speed | ≤1ms(the time from output of switch signal to 90%of initial setting current) | ||
Control port | TLL electricity level switch control, valid electricity has high/low level choices | ||
Volage-resisting | Input-Output ,input-machine hull: 1500V 10mA 60s AC output cathode and machine hull connection | ||
Protection | Can be used an opening way in a short time(request the outer shell be good to connect the ground avoid arcing between anode and machine hull connection in the machine) | ||
Usage environment | Work temperature:(-10-40)°C.Relative humidity:≤90% | ||
Cooling Type | The compulsive air cooling | ||
size | L×W×H=207×144×97(mm) | ||
Weight | 3kg |
Packaging Detail:carton box with bubble 60w: 207*144*97cm
- 100W CO2 Laser Power Supply for Cutter Engraver Engraving Cutting Machine 1 Pieces / (Min. Order)
- Step Motor And Drivers 1 Pieces / (Min. Order)
- Honeycomb 1 Pieces / (Min. Order)
- YAG Diode Stainless Steel Laser Marking Machine 1 Pieces / (Min. Order)
- Reflector Mirror for CO2 Laser Cutting Machine 1 Pieces / (Min. Order)
- 100W CO2 Laser Power Supply for Cutter Engraver Engraving Cutting Machine 1 Pieces / (Min. Order)
- Step Motor And Drivers 1 Pieces / (Min. Order)
- Honeycomb 1 Pieces / (Min. Order)
- IPG Fiber Laser Marking Machine 1 Pieces / (Min. Order)
- 20W Fiber Marker 1 Pieces / (Min. Order)
- Manipulator 15 Pieces / (Min. Order)
- Router End Mills 15 Pieces / (Min. Order)
- Diy CNC Router 15 Pieces / (Min. Order)
- Diy Laser Engraver 15 Pieces / (Min. Order)
- Fiber Laser Cutting Head 15 Pieces / (Min. Order)
- Optics Lenses 15 Pieces / (Min. Order)
- Xenon Lamps 15 Pieces / (Min. Order)
- Yag Rod 15 Pieces / (Min. Order)
- Laser Cavity 15 Pieces / (Min. Order)
- Laser Goggles 15 Pieces / (Min. Order)
- Laser Galvo Mirrors 15 Pieces / (Min. Order)
- Galvo Scanner 15 Pieces / (Min. Order)